Remote IO
Wago Comms
Description Enter IP Address for Wago device. Status will display OK when communication has been established with Wago device. Wago Comms will display the quantity of AI/O and DI/O, based on the I/O modules connected to the Wago device.
Availability
  • Available only in the dw2xx & dw2xx-v2 series products
  • Requires library: Remote I/O (option -60)
  • Singleton function block
  • Firmware versions 0x2024 and later
savvy-SFD Graphic wagoPort
Graphic with Parameters wagoPort

Parameters

IP Address Internal Parameter, Read-write, IP Address (unsigned 16-bit integer)
65535 = Inactive
Status Output, Read-only, Enumerated (signed 16-bit integer)
0 = OK
1 = Inactive
2 = Connecting
3 = Initializing
AI Count Internal Parameter, Read-only, Analog (signed 16-bit integer)
0 to 125
-1 = Unknown
AO Count Internal Parameter, Read-only, Analog (signed 16-bit integer)
0 to 125
-1 = Unknown
DI Count Internal Parameter, Read-only, Analog (signed 16-bit integer)
0 to 1000
-1 = Unknown
DO Count Internal Parameter, Read-only, Analog (signed 16-bit integer)
0 to 1000
-1 = Unknown