Remote IO
Wago AO
Description Enter the Index of the Wago analog output to be set. Value is the output to the terminal. Status confirms communication with I/O is functioning.
Availability
  • Available only in the dw2xx & dw2xx-v2 series products
  • Requires library: Remote I/O (option -60)
  • Firmware versions 0x2024 and later
savvy-SFD Graphic wagoAO
Graphic with Parameters wagoAO

Parameters

Index Internal Parameter, Read-write, Analog (signed 16-bit integer)
0 to 124
Value Input, Read-write, Hexadecimal (unsigned 16-bit integer)
0x0 to 0xFFFF
Status Internal Parameter, Read-only, Enumerated (signed 16-bit integer)
0 = OK
1 = Bad Index
2 = Comms Fault
Readback Internal Parameter, Read-only, Hexadecimal (unsigned 16-bit integer)
0x0 to 0xFFFF