Timers
Underlap
Description Output is set HIGH (1) when Input is set HIGH (1), after the Rising Delay Time has elapsed. Inverted Output is set LOW (0) immediately when Input is set HIGH. Output is set LOW (0) immediately when Input is set LOW (0). Inverted Output will be set to HIGH (1) after the Falling Delay Time has elapsed.
Availability
  • Requires library: Process Control (option -05)
  • Firmware versions 0x1029 and later
savvy-SFD Graphic underlap
Graphic with Parameters underlap

Parameters

Input Input, Read-write, Boolean (signed 16-bit integer)
0 = Low
1 = High
Rising Delay Time Input, Read-write, Analog (unsigned 16-bit integer)
0.00 s to 600.00 s
Falling Delay Time Input, Read-write, Analog (unsigned 16-bit integer)
0.00 s to 600.00 s
Output Output, Read-only, Set to default on hard initialization, Boolean (signed 16-bit integer)
0 = Low
1 = High
Inverted Output Output, Read-only, Set to default on hard initialization, Boolean (signed 16-bit integer)
0 = Low
1 = High