I/O (SENSOR)
Shock
Description Displays peak and current accelerations measured by the device. Can be used to monitor if device has experienced an impact. Displays the three dimensions, x, y, z, with respect to the device. Measurements are in number of G's.
Availability
  • Available only in the dw2xx-v2 series products
  • Requires library: System & I/O
  • Requires: Sensors
  • Singleton function block
  • Firmware versions 0x211A and later
savvy-SFD Graphic sns-shock
Graphic with Parameters sns-shock

Parameters

Accel (X) Internal Parameter, Read-only, Analog (signed 16-bit integer)
-16.00 g to 16.00 g
Accel (Y) Internal Parameter, Read-only, Analog (signed 16-bit integer)
-16.00 g to 16.00 g
Accel (Z) Internal Parameter, Read-only, Analog (signed 16-bit integer)
-16.00 g to 16.00 g
Accel (Magnitude) Output, Read-only, Analog (signed 16-bit integer)
0.00 g to 16.00 g
Peak (X) Internal Parameter, Read-only, Analog (signed 16-bit integer)
-16.00 g to 16.00 g
Peak (Y) Internal Parameter, Read-only, Analog (signed 16-bit integer)
-16.00 g to 16.00 g
Peak (Z) Internal Parameter, Read-only, Analog (signed 16-bit integer)
-16.00 g to 16.00 g
Peak (Magnitude) Output, Read-only, Analog (signed 16-bit integer)
0.00 g to 16.00 g
Log ∆g Threshold Internal Parameter, Read-write, Analog (signed 16-bit integer)
0.0 g to 10.0 g
0 = Do Not Log
Log (Magnitude) Internal Parameter, Read-only, Analog (signed 16-bit integer)
0.00 g to 16.00 g
Reset Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Reset