Utility
Shared Parameters
Description (description coming soon)
Availability
  • Available only in the dw2xx-v2 series products
  • Requires library: Process Control (option -05)
  • Firmware versions 0x2109 and later
savvy-SFD Graphic shared
Graphic with Parameters shared

Parameters

ID Internal Parameter, Read-write, Analog (signed 16-bit integer)
0 to 23
Analog Input Input, Read-write, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Disable
1 = Enable
Analog Output Output, Read-only, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
Status Output, Read-only, Enumerated (signed 16-bit integer)
0 = OK
1 = Type Mismatch
2 = Timeout
3 = Collision
Source Address Internal Parameter, Read-only, IP Address (unsigned 32-bit integer)
Boolean In 1 Input, Read-write, Boolean (signed 16-bit integer)
0 = Low
1 = High
Boolean In 2 Input, Read-write, Boolean (signed 16-bit integer)
0 = Low
1 = High
Boolean Out 1 Output, Read-only, Boolean (signed 16-bit integer)
0 = Low
1 = High
Boolean Out 2 Output, Read-only, Boolean (signed 16-bit integer)
0 = Low
1 = High