ModbusRTU Master
Eurotherm ERCFW09
Description (description coming soon)
Availability
  • Available only in the dw1xx series products
  • Requires library: System & I/O
  • Requires: Generic ModbusRTU Master Unisolated EIA-485 (option -13) or Generic ModbusRTU Master Isolated EIA-485 (option -12)
  • Firmware versions 0x1033 and later
savvy-SFD Graphic modbusCRW09
Graphic with Parameters modbusCRW09

Parameters

Modbus Address Internal Parameter, Read-write, Analog (signed 16-bit integer)
1 to 247
V03 Command Input, Read-write, Hexadecimal (unsigned 16-bit integer)
0x0 to 0xFFFF
Command Last Error Internal Parameter, Read-write, Enumerated (signed 16-bit integer)
-2 = Timeout
-1 = No Comms Port Defined
0 = None
1 = Illegal Function
2 = Illegal Data Address
3 = Illegal Data Value
4 = Slave Device Failure
5 = Acknowledge
6 = Slave Device Busy
7 = Negative Acknowledge
8 = Memory Parity Error
33 = Data Out of Range
34 = Write Protected
35 = Write during Undervoltage
36 = Write during Parameter Processing
64 = Comms Overrun Error
65 = Comms CRC Error
66 = Comms Address Error
67 = Comms Response Length Error
68 = Comms General Error
69 = Comms Unexpected Response
70 = Comms Buffer Overflow
72 = Comms Parity Error
73 = Comms No Buffer Available
Command Enable Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Disable
1 = Enable
V04 Speed Reference Input, Read-write, Analog (signed 16-bit integer)
-32767 to 32767
Speed Ref Last Error Internal Parameter, Read-write, Enumerated (signed 16-bit integer)
-2 = Timeout
-1 = No Comms Port Defined
0 = None
1 = Illegal Function
2 = Illegal Data Address
3 = Illegal Data Value
4 = Slave Device Failure
5 = Acknowledge
6 = Slave Device Busy
7 = Negative Acknowledge
8 = Memory Parity Error
33 = Data Out of Range
34 = Write Protected
35 = Write during Undervoltage
36 = Write during Parameter Processing
64 = Comms Overrun Error
65 = Comms CRC Error
66 = Comms Address Error
67 = Comms Response Length Error
68 = Comms General Error
69 = Comms Unexpected Response
70 = Comms Buffer Overflow
72 = Comms Parity Error
73 = Comms No Buffer Available
Speed Ref Enable Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Disable
1 = Enable
P100 Accel Ramp Time Input, Read-write, Analog (signed 16-bit integer)
0.0 s to 999.0 s
Acc Ramp Last Error Internal Parameter, Read-write, Enumerated (signed 16-bit integer)
-2 = Timeout
-1 = No Comms Port Defined
0 = None
1 = Illegal Function
2 = Illegal Data Address
3 = Illegal Data Value
4 = Slave Device Failure
5 = Acknowledge
6 = Slave Device Busy
7 = Negative Acknowledge
8 = Memory Parity Error
33 = Data Out of Range
34 = Write Protected
35 = Write during Undervoltage
36 = Write during Parameter Processing
64 = Comms Overrun Error
65 = Comms CRC Error
66 = Comms Address Error
67 = Comms Response Length Error
68 = Comms General Error
69 = Comms Unexpected Response
70 = Comms Buffer Overflow
72 = Comms Parity Error
73 = Comms No Buffer Available
Acc Ramp Enable Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Disable
1 = Enable
P101 Decel Ramp TIme Input, Read-write, Analog (signed 16-bit integer)
0.0 s to 999.0 s
Decel Ramp Last Error Internal Parameter, Read-write, Enumerated (signed 16-bit integer)
-2 = Timeout
-1 = No Comms Port Defined
0 = None
1 = Illegal Function
2 = Illegal Data Address
3 = Illegal Data Value
4 = Slave Device Failure
5 = Acknowledge
6 = Slave Device Busy
7 = Negative Acknowledge
8 = Memory Parity Error
33 = Data Out of Range
34 = Write Protected
35 = Write during Undervoltage
36 = Write during Parameter Processing
64 = Comms Overrun Error
65 = Comms CRC Error
66 = Comms Address Error
67 = Comms Response Length Error
68 = Comms General Error
69 = Comms Unexpected Response
70 = Comms Buffer Overflow
72 = Comms Parity Error
73 = Comms No Buffer Available
Decel Ramp Enable Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Disable
1 = Enable
V02 Drive Status Output, Read-only, Hexadecimal (unsigned 16-bit integer)
0x0 to 0xFFFF
Drive Status Last Error Internal Parameter, Read-write, Enumerated (signed 16-bit integer)
-2 = Timeout
-1 = No Comms Port Defined
0 = None
1 = Illegal Function
2 = Illegal Data Address
3 = Illegal Data Value
4 = Slave Device Failure
5 = Acknowledge
6 = Slave Device Busy
7 = Negative Acknowledge
8 = Memory Parity Error
33 = Data Out of Range
34 = Write Protected
35 = Write during Undervoltage
36 = Write during Parameter Processing
64 = Comms Overrun Error
65 = Comms CRC Error
66 = Comms Address Error
67 = Comms Response Length Error
68 = Comms General Error
69 = Comms Unexpected Response
70 = Comms Buffer Overflow
72 = Comms Parity Error
73 = Comms No Buffer Available
Drive Status Enable Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Disable
1 = Enable
P002 Motor Speed Output, Read-only, Analog (signed 16-bit integer)
-30000 RPM to 30000 RPM
Motor Speed Last Error Internal Parameter, Read-write, Enumerated (signed 16-bit integer)
-2 = Timeout
-1 = No Comms Port Defined
0 = None
1 = Illegal Function
2 = Illegal Data Address
3 = Illegal Data Value
4 = Slave Device Failure
5 = Acknowledge
6 = Slave Device Busy
7 = Negative Acknowledge
8 = Memory Parity Error
33 = Data Out of Range
34 = Write Protected
35 = Write during Undervoltage
36 = Write during Parameter Processing
64 = Comms Overrun Error
65 = Comms CRC Error
66 = Comms Address Error
67 = Comms Response Length Error
68 = Comms General Error
69 = Comms Unexpected Response
70 = Comms Buffer Overflow
72 = Comms Parity Error
73 = Comms No Buffer Available
Motor Speed Enable Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Disable
1 = Enable
P003 Motor Current Output, Read-only, Analog (signed 16-bit integer)
0.0 A to 2600.0 A
Motor Current Last Error Internal Parameter, Read-write, Enumerated (signed 16-bit integer)
-2 = Timeout
-1 = No Comms Port Defined
0 = None
1 = Illegal Function
2 = Illegal Data Address
3 = Illegal Data Value
4 = Slave Device Failure
5 = Acknowledge
6 = Slave Device Busy
7 = Negative Acknowledge
8 = Memory Parity Error
33 = Data Out of Range
34 = Write Protected
35 = Write during Undervoltage
36 = Write during Parameter Processing
64 = Comms Overrun Error
65 = Comms CRC Error
66 = Comms Address Error
67 = Comms Response Length Error
68 = Comms General Error
69 = Comms Unexpected Response
70 = Comms Buffer Overflow
72 = Comms Parity Error
73 = Comms No Buffer Available
Motor Current Enable Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Disable
1 = Enable
P010 Motor Power Output, Read-only, Analog (signed 16-bit integer)
0.0 kW to 1200.0 kW
Motor Power Last Error Internal Parameter, Read-write, Enumerated (signed 16-bit integer)
-2 = Timeout
-1 = No Comms Port Defined
0 = None
1 = Illegal Function
2 = Illegal Data Address
3 = Illegal Data Value
4 = Slave Device Failure
5 = Acknowledge
6 = Slave Device Busy
7 = Negative Acknowledge
8 = Memory Parity Error
33 = Data Out of Range
34 = Write Protected
35 = Write during Undervoltage
36 = Write during Parameter Processing
64 = Comms Overrun Error
65 = Comms CRC Error
66 = Comms Address Error
67 = Comms Response Length Error
68 = Comms General Error
69 = Comms Unexpected Response
70 = Comms Buffer Overflow
72 = Comms Parity Error
73 = Comms No Buffer Available
Motor Power Enable Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Disable
1 = Enable