Time Counters
Minutes Counter
Description While Run Enable is set to Run (1) and Preset Enable is Inactive (0), Seconds will display the time elapsed in seconds, and Minutes Elapsed will display the time elapsed in whole number of minutes.

If a preset number of minutes is needed, set the value in Preset Minutes and then set Preset Enable to Active (1), and then Inactive (0). Minutes Elapsed will be set to the value of Preset Minutes.
Availability
  • Available only in the dw2xx & dw2xx-v2 series products
  • Requires library: Process Control (option -05)
  • Firmware versions 0x2001 and later
savvy-SFD Graphic minsCounter
Graphic with Parameters minsCounter

Parameters

Minutes Elapsed Output, Read-only, Analog (signed 16-bit integer)
0 m to 32767 m
32767 = overflow
Run Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Stop
1 = Run
Preset Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Preset
Preset Minutes Input, Read-write, Analog (signed 16-bit integer)
0 m to 32766 m
Seconds Internal Parameter, Read-only, Analog (unsigned 16-bit integer)
0 s to 59 s