| Count |
Input, Read-only, Placeholder (special (count & timestamp))
Linear Position v1 - This function block is obsolete and should not be used.
Please replace all instances of this block with Linear Position v2 which is functionally identical.
|
| Hold |
Input, Read-write, Boolean (signed 16-bit integer)
Linear Position v1 - This function block is obsolete and should not be used.
Please replace all instances of this block with Linear Position v2 which is functionally identical.
0 = Inactive
1 = Hold
|
| Pulses/Rev |
Input, Read-write, Analog (signed 16-bit integer)
1 ppr to 30000 ppr
Linear Position v1 - This function block is obsolete and should not be used.
Please replace all instances of this block with Linear Position v2 which is functionally identical.
|
| Set Zero |
Input, Read-write, Boolean (signed 16-bit integer)
Linear Position v1 - This function block is obsolete and should not be used.
Please replace all instances of this block with Linear Position v2 which is functionally identical.
0 = Inactive
1 = Set
|
| Status |
Internal Parameter, Read-only, Boolean (signed 16-bit integer)
Linear Position v1 - This function block is obsolete and should not be used.
Please replace all instances of this block with Linear Position v2 which is functionally identical.
0 = OK
1 = Fault
|
| Output |
Output, Read-only, Analog (32-bit IEEE-754 floating point value)
-340E36 to 340E36
Linear Position v1 - This function block is obsolete and should not be used.
Please replace all instances of this block with Linear Position v2 which is functionally identical.
|
| Scaler |
Input, Read-write, Analog (32-bit IEEE-754 floating point value)
-340E36 per rev to 340E36 per rev
Linear Position v1 - This function block is obsolete and should not be used.
Please replace all instances of this block with Linear Position v2 which is functionally identical.
|
