Control
Clamped Integrator
Description (description coming soon)
Availability
  • Available only in the dw2xx & dw2xx-v2 series products
  • Requires library: Process Control (option -05)
  • Firmware versions 0x201C and later
savvy-SFD Graphic integralClamped
Graphic with Parameters integralClamped

Parameters

Input Input, Read-write, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
Integral Time Input, Read-write, Analog (signed 16-bit integer)
0.00 s to 100.00 s
0 = Off
Preset Value Input, Read-write, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
Preset Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Preset
Reset Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Reset
Hold Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Hold
Output Output, Read-only, Set to default on hard initialization, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
Upper Clamp Input, Read-write, Analog (signed 16-bit integer)
-327.67 % to 327.67 %

If the Input exceeds this value, the Output will be set to this value.
Lower Clamp Input, Read-write, Analog (signed 16-bit integer)
-327.67 % to 327.67 %

If the Input is less than this value, the Output will be set to this value.
Clamping Output Output, Read-only, Boolean (signed 16-bit integer)
0 = Not Clamping
1 = Clamping