I/O (Encoder)
Encoder 1 Marker Event
Description Output is driven by the edge of the encoder marker signal, Z+, Z-. The edge type is defined by Type.
Type can be set to Positive Edge (rising), Negative Edge (falling), or Either Edge.
Output can be connected to Event type parameters.
Availability
  • Available only in the dw2xx-v2 series products
  • Requires library: System & I/O
  • Requires: Two Encoder inputs with markers
  • Singleton function block
  • Firmware versions 0x2105 and later
savvy-SFD Graphic inEvEnc1Z
Graphic with Parameters inEvEnc1Z

Parameters

Type Input, Read-write, Enumerated (signed 16-bit integer)
0 = Disabled
1 = Positive Edge
2 = Negative Edge
3 = Either Edge
Output Output, Read-only, Placeholder (special (timestamp))