I/O (DIO)
DI3 Event Input
Description Output is an Event type signal driven by the edge of Input defined by Type.
Type can be set to Positive Edge (rising), Negative Edge (falling), or Either Edge.
Output can be connected to Event type parameters.
Availability
  • Available only in the dw2xx-v2 series products
  • Requires library: System & I/O
  • Requires: Eight Digital Inputs
  • Singleton function block
  • Firmware versions 0x2105 and later
savvy-SFD Graphic inEvDin3
Graphic with Parameters inEvDin3

Parameters

Type Input, Read-write, Enumerated (signed 16-bit integer)
0 = Disabled
1 = Positive Edge
2 = Negative Edge
3 = Either Edge
Output Output, Read-only, Placeholder (special (timestamp))