I/O (FI)
FI3 Digital Input
Description Set the Input Type to define the threshold Voltage to set Output HIGH (1).
Availability
  • Available only in the dw2xx-v2 series products
  • Requires library: System & I/O
  • Requires: Four Frequency Inputs
  • Singleton function block
  • Firmware versions 0x2101 and later
savvy-SFD Graphic fin3d
Graphic with Parameters fin3d

Parameters

Input Type Internal Parameter, Read-write, Enumerated (signed 16-bit integer)
0 = 5V Logic with pull-down
1 = 5V Logic with pull-up
2 = 5V Logic
3 = 24V Logic with pull-down
Output Output, Read-only, Boolean (signed 16-bit integer)
0 = Low
1 = High