Timers
Fast Oscillator
Description Output oscillates between HIGH (1) and LOW (0) at a rate defined by Half Period. Half Period represents the number of clock cycles the Output is set to one state.
Availability
  • Available only in the dw2xx & dw2xx-v2 series products
  • Requires library: Process Control (option -05)
  • Firmware versions 0x2000 and later
savvy-SFD Graphic fastOscillator
Graphic with Parameters fastOscillator

Parameters

Half Period Input, Read-write, Analog (signed 16-bit integer)
1 cycles to 10000 cycles

Measured in timebase cycles
Output Output, Read-only, Boolean (signed 16-bit integer)
0 = Low
1 = High