I/O
T6 Digital Input
Description Range: +24V to 0V

Select the Voltage range of the input by setting Range to be 24V Logic, 12V Logic, or 5V Logic. Range defines the Voltage level that sets Output HIGH (1). Monitor shows the actual Volts on the terminal.
Availability
  • Available only in the dw2xx series products
  • Requires library: System & I/O
  • Requires: Six Digital Inputs
  • Singleton function block
  • Firmware versions 0x2006 and later
savvy-SFD Graphic dinT6
Graphic with Parameters dinT6

Parameters

Monitor Output, Read-only, Analog (signed 16-bit integer)
0.0 V to 30.0 V
Range Input, Read-write, Enumerated (signed 16-bit integer)
0 = 5V Logic
1 = 12V Logic
2 = 24V Logic
Output Output, Read-only, Boolean (signed 16-bit integer)
0 = Low
1 = High