Winder
Taper Tension
Description (description coming soon)
Availability
  • Requires library: Winder Control (option -06)
  • Firmware versions 0x100C and later
savvy-SFD Graphic taperTension
Graphic with Parameters taperTension

Parameters

Diameter Calculator Internal Parameter, Read-write, Function Block Association (signed 16-bit integer)
Tension Setpoint Input, Read-write, Analog (signed 16-bit integer)
0.00 % to 100.00 %
Taper Type Input, Read-write, Boolean (signed 16-bit integer)
0 = Linear Taper
1 = Hyperbolic Taper
Taper Strength Input, Read-write, Analog (signed 16-bit integer)
-100.00 % to 100.00 %
Tapered Tension Internal Parameter, Read-only, Analog (signed 16-bit integer)
-100.00 % to 100.00 %
Trim Input, Read-write, Analog (signed 16-bit integer)
-100.00 % to 100.00 %
Output Output, Read-only, Analog (signed 16-bit integer)
-100.00 % to 100.00 %