Ramps
MOP
Description (description coming soon)
Availability
  • Requires library: Process Control (option -05)
  • Firmware versions 0x1012 and later
savvy-SFD Graphic mop
Graphic with Parameters mop

Parameters

Up Command Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Active
Down Command Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Active
Up Time Input, Read-write, Time or Rate (signed 16-bit integer)
0.1 s to 3000.0 s
Down Time Input, Read-write, Time or Rate (signed 16-bit integer)
0.1 s to 3000.0 s
Preset Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Preset
Preset Value Input, Read-write, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
Lower Clamp Input, Read-write, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
Upper Clamp Input, Read-write, Analog (signed 16-bit integer)
-327.67 % to 327.67 %
Output Memory Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Not Persistent
1 = Persistent
Output Output, Read-only, Analog (signed 16-bit integer)
-327.67 % to 327.67 %