Utility
CommsServer Indirect Block
Description A block of four indirect parameters for ModbusRTU Slave, ModbusTCP Slave and EIP/PCCC Server.
Availability
  • Requires library: System & I/O
  • Requires: EIA-485 ModbusRTU Slave (option -02) or ModbusTCP Slave (option -04) or Comms Server
  • Firmware versions 0x102C and later
savvy-SFD Graphic indirectBlock
Graphic with Parameters indirectBlock

Parameters

CommsServer Indirect 0 Internal Parameter, Read-write, Analog (unsigned 16-bit integer)
0 to 65535

ModbusRTU Slave, ModbusTCP Slave and EIP/PCCC Server
CommsServer Indirect 1 Internal Parameter, Read-write, Analog (unsigned 16-bit integer)
0 to 65535

ModbusRTU Slave, ModbusTCP Slave and EIP/PCCC Server
CommsServer Indirect 2 Internal Parameter, Read-write, Analog (unsigned 16-bit integer)
0 to 65535

ModbusRTU Slave, ModbusTCP Slave and EIP/PCCC Server
CommsServer Indirect 3 Internal Parameter, Read-write, Analog (unsigned 16-bit integer)
0 to 65535

ModbusRTU Slave, ModbusTCP Slave and EIP/PCCC Server