Winder
Diameter Calculator
Description (description coming soon)
Availability
  • Requires library: Winder Control (option -06)
  • Firmware versions 0x100C and later
savvy-SFD Graphic diaCalc
Graphic with Parameters diaCalc

Parameters

Web Speed Input, Read-write, Analog (signed 16-bit integer)
-105.00 % to 105.00 %
Reel Speed Input, Read-write, Analog (signed 16-bit integer)
-105.00 % to 105.00 %
Absolute Web Speed Internal Parameter, Read-only, Analog (signed 16-bit integer)
0.00 % to 105.00 %
Absolute Reel Speed Internal Parameter, Read-only, Analog (signed 16-bit integer)
0.00 % to 105.00 %
Minimum Web Speed Input, Read-write, Analog (signed 16-bit integer)
0.00 % to 105.00 %
Hold Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Hold
Preset Value Input, Read-write, Analog (signed 16-bit integer)
0.00 % to 100.00 %
Preset Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Inactive
1 = Preset
Minimum Diameter Input, Read-write, Analog (signed 16-bit integer)
0.00 % to 100.00 %
Filter Time Constant Input, Read-write, Analog (signed 16-bit integer)
0.00 s to 300.00 s
0 = Off
Diameter Memory Internal Parameter, Read-write, Boolean (signed 16-bit integer)
0 = Not Persistent
1 = Persistent
Diameter Output Output, Read-only, Analog (signed 16-bit integer)
0.00 % to 100.00 %
Unfiltered Diameter Output, Read-only, Analog (signed 16-bit integer)
0.00 % to 100.00 %
Web Break Output Output, Read-only, Boolean (signed 16-bit integer)
0 = OK
1 = Web Break
Web Break Threshold Input, Read-write, Analog (signed 16-bit integer)
0.00 % to 100.00 %
Web Break Enable Input, Read-write, Boolean (signed 16-bit integer)
0 = Disabled
1 = Enabled